BHPU-III PU Foam Spray Equipment
The parts of BHPU-III polyurethane spray perfusion equipment are from America, which making sure the pressure is high enough for mixing the double component materials together. It has the separate heater which is 2500 watt. This PU spray perfusion equipment provides the reliable heat source for the row materials, and solves the problem of the viscosity of the materials. The heating pipe is 15 meters long and it preserves the heat energy of the materials. The system of spray gun with non-solvents washing makes the PU spray perfusion equipment easy to operate, and maintain.
| Specifications of BHPU-III PU Foam Spray Equipment | |
| Standard Configuration | |
| Mainframe | 1 set |
| Spray gun | 1set |
| Heating and preserved pipe | 15m |
| Connecting pipe for spray gun | 1.5 m |
| Max. pipe length | 45m(optional) |
| Transfer pump | 2 sets |
| Technical Parameter | |
| Power source | 220v, 7000w 50HZ |
| Air source | 7~11kg/ cm2 0.9m3 /min |
| Output | 8kg/min |
| Heating device power for material | 2250w x2 |
| Heating power for pipe heating | 2000w |
| Single component output pressure | 75-90kg/cm2 |
| Shipping Parameter | |
| Weight | 150kg |
| Volume | 800x 700x1100(mm) |
Inquiry
Other Products
